- General Information
- Manufacturer
- ATEN Technology, Inc
- Manufacturer Website Address
- http://www.aten.com
- Brand Name
- ATEN
- Package Type
- Retail
- Product Type
- Data Transfer Adapter
The IC485SN is hardware solutions to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000'), over four or two wire cable for full or half duplex, respectively. The converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter. Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation, making for a cost effective network configuration. The IC485SN is a bi-directional interface converters for RS-232 and RS-485. With the IC-485 series, it provides Point-to-Point, Multidrop and Simplex operations.
- Technical Information
- Connector Type on First End
- DB-25 RS-232 Serial - Female
- Connector on First End Details
- 1 x 25-pin DB-25 RS-232 Serial Female
- Connector Type on Second End
- RJ-11
- Connector on Second End Details
- 1 x 4-pin
- 1 x RJ-11
- Power Description
- Power Consumption
- 0.09 W
- Physical Characteristics
- Product Material
- Plastic
- Height
- 21 mm
- Width
- 54.5 mm
- Length
- 79 mm
- Weight (Approximate)
- 60 g
- Miscellaneous
- Additional Information
- Data transmission controlled by the RTS signal
- DCE or DTE selectable switch
- Point to point, multidrop, and simplex/duplex link selection
- Four wire full duplex & two wire half duplex
- Non powered operation
- Bi-directional
- Compatibility
- -
